OSB BOARD
The surface of the Gemei metal carved board is a high-quality colored embossed decorative metal plate treated with a special layer. The middle layer is a hard high-density polyurethane foam insulation and heat insulation layer treated with flame retardancy, and the bottom layer is an aluminum foil protective layer that plays a role in thermal insulation and moisture prevention.
Flat pattern series
Metal carved boards mainly have the following four core energy-saving technologies: specially made aluminum zinc plated steel plate, hard foam polyurethane, reflective film, and air layer.
I Product Introduction:
The surface of the Gemei metal carved board is a high-quality colored embossed decorative metal plate treated with a special layer. The middle layer is a hard high-density polyurethane foam insulation and heat insulation layer treated with flame retardancy, and the bottom layer is an aluminum foil protective layer that plays a role in thermal insulation and moisture prevention. Due to the inherent characteristics of insulation, waterproofing, flame retardancy, lightweight and seismic resistance, convenient construction, sound insulation and noise reduction, green environmental protection, aesthetics and durability, as well as the simple and practical assembly method of the wall panel, which is not limited by seasonal environment, installation and use are very safe and convenient, suitable for all seasons. This innovative exterior wall insulation decorative panel highlights its absolute advantages. There are over a hundred combinations of relief patterns and colors. The luxurious and beautiful decorative effect highlights the grade and taste of the building. The simple and flexible disassembly and assembly method makes the replacement of wall design matching easy. This board is suitable for thermal insulation and decoration of exterior walls of newly built brick concrete structures, frame structures, steel structures, lightweight houses, and other types of buildings. It is also suitable for energy-saving renovation of existing buildings, as well as indoor and outdoor decoration.
II Material structure diagram
Surface: 0.3-1.0MM aluminum zinc plated, aluminum alloy material, surface paint is high weather resistant polyester paint, electrostatic spray powder.
Middle inner core: Made of hard polyurethane foam insulation layer with B1-B3 fire resistance and a density of 42-45kg/m ³， The thermal conductivity coefficient is 0.02, making it the best insulation material on the market, with a thickness of 1.6 cm (equivalent to 5 cm of benzene board), and excellent insulation performance.
Back: Made of moisture-proof and heat-insulating aluminum foil, aluminum foil fiberglass cloth, or color coated board.
III Product Features
IV Product parameters
Note: For special needs, it can be produced to a certain length
Classify All
Metal carved board
Brick pattern
grain
Orange peel pattern
Imitation stone pattern
Flat pattern
Coarse brick pattern
Two color series
Gemei House
Light steel villa
Integrated housing
Garbage room
sentry box
Environmentally friendly toilets
Scenic Area Room
Rural self built houses
Mobile Office
Rural exterior wall insulation
Housing accessories
Aluminum alloy accessories
Asphalt shingles
Inner wall panel
Wood top plate
Glass magnesium fireproof floor
Microcrystalline stone flooring
Ousong board
Waterproof self-adhesive
Wooden square keel
External wall insulation board
External wall insulation board
External wall panel
External wall hanging plate
Rural exterior wall insulation board
Exterior wall insulation and decoration integrated board
Microcrystalline stone floor (2)
Microcrystalline stone floor (2)
Views:
one thousand and sixty-seven
Microcrystalline stone floor (2)
The surface of the Gemei metal carved board is a high-quality colored embossed decorative metal plate treated with a special layer. The middle layer is a hard high-density polyurethane foam insulation and heat insulation layer treated with flame retardancy, and the bottom layer is an aluminum foil protective layer that plays a role in thermal insulation and moisture prevention.
Classification
Housing accessories - Microcrystalline stone flooring
Product Consultation
Return to Product Center
Consultation hotline: 18905466321
Product Description
Flat pattern series
Dongying Gemei New Materials Co., Ltd
Metal carved boards mainly have the following four core energy-saving technologies: specially made aluminum zinc plated steel plate, hard foam polyurethane, reflective film, and air layer.
I Product Introduction:
The surface of the Gemei metal carved board is a high-quality colored embossed decorative metal plate treated with a special layer. The middle layer is a hard high-density polyurethane foam insulation and heat insulation layer treated with flame retardancy, and the bottom layer is an aluminum foil protective layer that plays a role in thermal insulation and moisture prevention. Due to the inherent characteristics of insulation, waterproofing, flame retardancy, lightweight and seismic resistance, convenient construction, sound insulation and noise reduction, green environmental protection, aesthetics and durability, as well as the simple and practical assembly method of the wall panel, which is not limited by seasonal environment, installation and use are very safe and convenient, suitable for all seasons. This innovative exterior wall insulation decorative panel highlights its absolute advantages. There are over a hundred combinations of relief patterns and colors. The luxurious and beautiful decorative effect highlights the grade and taste of the building. The simple and flexible disassembly and assembly method makes the replacement of wall design matching easy. This board is suitable for thermal insulation and decoration of exterior walls of newly built brick concrete structures, frame structures, steel structures, lightweight houses, and other types of buildings. It is also suitable for energy-saving renovation of existing buildings, as well as indoor and outdoor decoration.
II Material structure diagram
Dongying Gemei New Materials Co., Ltd
Surface: 0.3-1.0MM aluminum zinc plated, aluminum alloy material, surface paint is high weather resistant polyester paint, electrostatic spray powder.
Middle inner core: Made of hard polyurethane foam insulation layer with B1-B3 fire resistance and a density of 42-45kg/m ³， The thermal conductivity coefficient is 0.02, making it the best insulation material on the market, with a thickness of 1.6 cm (equivalent to 5 cm of benzene board), and excellent insulation performance.
Back: Made of moisture-proof and heat-insulating aluminum foil, aluminum foil fiberglass cloth, or color coated board.
III Product Features
Dongying Gemei New Materials Co., Ltd
IV Product parameters
Dongying Gemei New Materials Co., Ltd
Note: For special needs, it can be produced to a certain length
V Packaging instructions
A. Before packaging: 3800 * 383 * 16mm (8 pieces/bag) After packaging: 3810 * 420 * 140mm
B. Before packaging: 4000 * 383 * 16mm (8 pieces/bag) After packaging: 4010 * 420 * 140mm
C. Before packaging: 6000 * 383 * 16mm (5 pieces/bag) After packaging: 6010 * 420 * 90mm
D. Before packaging: 3800 * 383 * 16mm (4 pieces/bag) After packaging: 3810 * 420 * 170mm
E. Before packaging: 4000 * 383 * 16mm (4 pieces/bag) After packaging: 4010 * 420 * 170mm
Note: Special specifications, dimensions, and double-sided steel plate wall panels will be separately agreed upon.
Domestic packaging: 1. Use kraft paper for moisture-proof and rainproof packaging. 2. Use cardboard boxes for precision packaging.
Foreign trade packaging: Use kraft paper for moisture-proof packaging, with the outer layer wrapped in cardboard boxes.
VI Installation method
Convenient and fast dry hanging construction, using alloy accessories and screws for installation and fixation, greatly shortens the construction period and saves labor costs compared to traditional materials.
Construction advantages: 1. Lightweight - dry hanging installation 2 Fast - short construction period 3 Savings - Construction Costs
