Dashan Wood Flat Metal Carved Board

Metal carved board is a safe and environmentally friendly wall decoration building material with many functions and is widely used in many regions. The installation steps for metal carved boards include the following: 1 Substrate wall body: The layered structure of the metal carved board ensures that the insulation decorative panel itself is firm and flat

Installation steps of metal carving board

Metal carved board is a safe and environmentally friendly wall decoration building material with many functions and is widely used in many regions. The installation steps for metal carved boards include the following:

1. Substrate wall body: The layered structure of the metal carved board ensures that the insulation decorative panel itself is firm and flat. Therefore, the bottom layer should be coated with standardized cement mortar, without cracking, powder shedding, sand production, wall hollowing, peeling, surface leveling, vertical building facades, vertical external corner lines, and fine convexity and surface roughness of the basic wall can be adjusted using specialized mortar.

2. Sticking: To achieve the required bonding compressive strength, it is necessary to immediately stick it to the wall like a special mortar for lightweight boards.

3. Sounding: Use sounding components to tightly tie the decorative panel layer, and then tightly connect the furniture panels and walls. In multi-story buildings in urban squares, the use of this duplex building as a fixed and immovable method provides more safety precautions.

4. Joint solution: A joint with a width of 5mm to 10mm must be ensured in the middle of the furniture board. After the cement mortar at the bottom of the finished board is dried, foam plastic should be embedded in the joint and all joints should be covered with weather resistant sealing silicone material.

The installation of metal carved boards is generally divided into four steps: basic wall surface, bonding, steel bar anchoring, and joint resolution. The furniture board must be installed according to the above process, and key points need to be solved throughout the installation process to prevent other common faults.